Wyszukiwanie w witrynie

Jak zainstalować i skonfigurować „PowerDNS” (z MariaDB) i „PowerAdmin” w RHEL/CentOS 7


PowerDNS to serwer DNS działający na wielu pochodnych systemu Linux/Unix. Można go skonfigurować z różnymi backendami, w tym z plikami stref w stylu BIND, relacyjnymi bazami danych lub algorytmami równoważenia obciążenia/przełączania awaryjnego. Można go również skonfigurować jako rekursor DNS działający jako oddzielny proces na serwerze.

Najnowsza wersja serwera autorytatywnego PowerDNS to 3.4.4, ale ta dostępna obecnie w repozytorium EPEL to 3.4.3. Polecam zainstalować tę dla repozytorium EPEL ze względu na fakt, że ta wersja jest testowana w CentOS i Fedorze. Dzięki temu będziesz mógł łatwo aktualizować PowerDNS w przyszłości.

Ten artykuł ma na celu pokazać, jak zainstalować i skonfigurować główny serwer PowerDNS z backendem MariaDB i PowerAdmin – przyjaznym narzędziem do zarządzania interfejsem internetowym dla ZasilanieDNS.

Na potrzeby tego artykułu będę używać serwera z:

Hostname: centos7.localhost 
IP Address 192.168.0.102

Krok 1: Instalacja PowerDNS z backendem MariaDB

1. Najpierw musisz włączyć repozytorium EPEL na swoim serwerze, po prostu użyj:

yum install epel-release.noarch 

2. Następnym krokiem jest instalacja serwera MariaDB. Można to łatwo zrobić, uruchamiając następujące polecenie:

yum -y install mariadb-server mariadb

3. Następnie skonfigurujemy MySQL tak, aby włączał się i uruchamiał po uruchomieniu systemu:

systemctl enable mariadb.service
systemctl start mariadb.service

4. Teraz, gdy usługa MySQL jest uruchomiona, zabezpieczymy i ustawimy hasło dla MariaDB, uruchamiając:

mysql_secure_installation
Podążaj za wskazówkami
/bin/mysql_secure_installation: line 379: find_mysql_client: command not found

NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MariaDB
      SERVERS IN PRODUCTION USE!  PLEASE READ EACH STEP CAREFULLY!

In order to log into MariaDB to secure it, we'll need the current
password for the root user.  If you've just installed MariaDB, and
you haven't set the root password yet, the password will be blank,
so you should just press enter here.

Enter current password for root (enter for none):  Press ENTER
OK, successfully used password, moving on...

Setting the root password ensures that nobody can log into the MariaDB
root user without the proper authorisation.

Set root password? [Y/n] y     
New password:  ← Set New Password
Re-enter new password:  ← Repeat Above Password
Password updated successfully!
Reloading privilege tables..
 ... Success!


By default, a MariaDB installation has an anonymous user, allowing anyone
to log into MariaDB without having to have a user account created for
them.  This is intended only for testing, and to make the installation
go a bit smoother.  You should remove them before moving into a
production environment.

Remove anonymous users? [Y/n] y ← Choose “y” to disable that user
 ... Success!

Normally, root should only be allowed to connect from 'localhost'.  This
ensures that someone cannot guess at the root password from the network.

Disallow root login remotely? [Y/n] n ← Choose “n” for no
 ... skipping.

By default, MariaDB comes with a database named 'test' that anyone can
access.  This is also intended only for testing, and should be removed
before moving into a production environment.

Remove test database and access to it? [Y/n] y ← Choose “y” for yes
 - Dropping test database...
 ... Success!
 - Removing privileges on test database...
 ... Success!

Reloading the privilege tables will ensure that all changes made so far
will take effect immediately.

Reload privilege tables now? [Y/n] y ← Choose “y” for yes
 ... Success!

Cleaning up...

All done!  If you've completed all of the above steps, your MariaDB
installation should now be secure.

Thanks for using MariaDB!

5. Po pomyślnym zakończeniu konfiguracji MariaDB możemy kontynuować instalację PowerDNS. Można to łatwo wykonać, uruchamiając:

yum -y install pdns pdns-backend-mysql

6. Plik konfiguracyjny dla PowerDNS znajduje się w /etc/pdns/pdns, ale przed jego edycją skonfigurujemy bazę danych MySQL dla Usługa PowerDNS. Najpierw połączymy się z serwerem MySQL i utworzymy bazę danych o nazwie powerdns:

mysql -u root -p
MariaDB [(none)]> CREATE DATABASE powerdns;

7. Następnie utworzymy użytkownika bazy danych o nazwie powerdns:

MariaDB [(none)]> GRANT ALL ON powerdns.* TO 'powerdns'@'localhost' IDENTIFIED BY 'tecmint123';
MariaDB [(none)]> GRANT ALL ON powerdns.* TO 'powerdns'@'centos7.localdomain' IDENTIFIED BY 'tecmint123';
MariaDB [(none)]> FLUSH PRIVILEGES;

Uwaga: Zastąp „tecmint123” rzeczywistym hasłem, którego chcesz używać podczas konfiguracji.

8. Kontynuujemy tworzenie tabel bazy danych używanych przez PowerDNS. Wykonuj je blok po bloku:

MariaDB [(none)]> USE powerdns;
MariaDB [(none)]> CREATE TABLE domains (
id INT auto_increment,
name VARCHAR(255) NOT NULL,
master VARCHAR(128) DEFAULT NULL,
last_check INT DEFAULT NULL,
type VARCHAR(6) NOT NULL,
notified_serial INT DEFAULT NULL,
account VARCHAR(40) DEFAULT NULL,
primary key (id)
);

MariaDB [(none)]> CREATE UNIQUE INDEX name_index ON domains(name);
MariaDB [(none)]> CREATE TABLE records (
id INT auto_increment,
domain_id INT DEFAULT NULL,
name VARCHAR(255) DEFAULT NULL,
type VARCHAR(6) DEFAULT NULL,
content VARCHAR(255) DEFAULT NULL,
ttl INT DEFAULT NULL,
prio INT DEFAULT NULL,
change_date INT DEFAULT NULL,
primary key(id)
);

MariaDB [(none)]> CREATE INDEX rec_name_index ON records(name);
MariaDB [(none)]> CREATE INDEX nametype_index ON records(name,type);
MariaDB [(none)]> CREATE INDEX domain_id ON records(domain_id);

MariaDB [(none)]> CREATE TABLE supermasters (
ip VARCHAR(25) NOT NULL,
nameserver VARCHAR(255) NOT NULL,
account VARCHAR(40) DEFAULT NULL
);

Możesz teraz wyjść z konsoli MySQL, wpisując:

MariaDB [(none)]> quit;

9. Na koniec możemy przystąpić do konfiguracji naszego PowerDNS w taki sposób, aby używał MySQL jako backendu. W tym celu otwórz plik konfiguracyjny PowerDNS znajdujący się pod adresem:

vim /etc/pdns/pdns.conf 

W tym pliku poszukaj linii wyglądających tak:

#################################
launch        Which backends to launch and order to query them in
#
launch=

Zaraz po tym umieść następujący kod:

launch=gmysql
gmysql-host=localhost
gmysql-user=powerdns
gmysql-password=user-pass
gmysql-dbname=powerdns

Zmień „hasło użytkownika” na rzeczywiste hasło, które ustawiłeś wcześniej. Oto jak wygląda moja konfiguracja:

Zapisz zmianę i wyjdź z.

10. Teraz zaczniemy i dodamy PowerDNS do listy usług, zaczynając od startu systemu:

systemctl enable pdns.service 
systemctl start pdns.service 

W tym momencie Twój serwer PowerDNS jest gotowy i działa. Więcej informacji na temat PowerDNS można znaleźć w instrukcji dostępnej pod adresem http://downloads.powerdns.com/documentation/html/index.html