Jak zarządzać usługami i jednostkami „Systemd” za pomocą „Systemctl” w systemie Linux
Systemctl to narzędzie systemd odpowiedzialne za kontrolowanie systemu systemd i menedżera usług. Systemd to zbiór demonów, narzędzi i bibliotek do zarządzania systemem, który zastępuje demona init System V. Systemd funkcjonuje jako centralna platforma zarządzania i konfiguracji dla systemów typu UNIX.
W systemie Linux ekosystem Systemd został zaimplementowany w większości standardowych dystrybucji Linuksa z kilkoma wyjątkami. Systemd jest procesem nadrzędnym wszystkich innych demonów, często, ale nie zawsze.
Ten artykuł ma na celu rzucić światło na „Jak kontrolować system i usługi” w systemie działającym na platformie systemd.
Zaczynając od podstaw Systemtd i Systemctl
1. Najpierw sprawdź, czy w Twoim systemie jest zainstalowany systemd i jaka jest wersja aktualnie zainstalowanego Systemd?
systemctl --version
systemd 215
+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR
Z powyższego przykładu jasno wynika, że mamy zainstalowaną wersję systemu 215.
2. Sprawdź, gdzie są zainstalowane pliki binarne i biblioteki systemd i systemctl.
whereis systemd
systemd: /usr/lib/systemd /etc/systemd /usr/share/systemd /usr/share/man/man1/systemd.1.gz
whereis systemctl
systemctl: /usr/bin/systemctl /usr/share/man/man1/systemctl.1.gz
3. Sprawdź, czy systemd jest uruchomiony, czy nie.
ps -eaf | grep [s]ystemd
root 1 0 0 16:27 ? 00:00:00 /usr/lib/systemd/systemd --switched-root --system --deserialize 23
root 444 1 0 16:27 ? 00:00:00 /usr/lib/systemd/systemd-journald
root 469 1 0 16:27 ? 00:00:00 /usr/lib/systemd/systemd-udevd
root 555 1 0 16:27 ? 00:00:00 /usr/lib/systemd/systemd-logind
dbus 556 1 0 16:27 ? 00:00:00 /bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
Uwaga: systemd działa jako demon nadrzędny (PID=1). W powyższym poleceniu ps z (-e) wybierz wszystkie procesy, (-a) wybierz wszystkie procesy z wyjątkiem liderów sesji i ( -f) dla listy w pełnym formacie (tj. -eaf).
Zwróć także uwagę na nawiasy kwadratowe w powyższym przykładzie i pozostałych przykładach. Wyrażenie w nawiasie kwadratowym jest częścią dopasowywania wzorca klasy znaków w grep.
4. Przeanalizuj proces rozruchu systemowego.
systemd-analyze
Startup finished in 487ms (kernel) + 2.776s (initrd) + 20.229s (userspace) = 23.493s
5. Analizuj czas potrzebny każdemu procesowi podczas uruchamiania.
systemd-analyze blame
8.565s mariadb.service
7.991s webmin.service
6.095s postfix.service
4.311s httpd.service
3.926s firewalld.service
3.780s kdump.service
3.238s tuned.service
1.712s network.service
1.394s lvm2-monitor.service
1.126s systemd-logind.service
....
6. Analizuj łańcuch krytyczny podczas uruchamiania.
systemd-analyze critical-chain
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
multi-user.target @20.222s
└─mariadb.service @11.657s +8.565s
└─network.target @11.168s
└─network.service @9.456s +1.712s
└─NetworkManager.service @8.858s +596ms
└─firewalld.service @4.931s +3.926s
└─basic.target @4.916s
└─sockets.target @4.916s
└─dbus.socket @4.916s
└─sysinit.target @4.905s
└─systemd-update-utmp.service @4.864s +39ms
└─auditd.service @4.563s +301ms
└─systemd-tmpfiles-setup.service @4.485s +69ms
└─rhel-import-state.service @4.342s +142ms
└─local-fs.target @4.324s
└─boot.mount @4.286s +31ms
└─systemd-fsck@dev-disk-by\x2duuid-79f594ad\x2da332\x2d4730\x2dbb5f\x2d85d19608096
└─dev-disk-by\x2duuid-79f594ad\x2da332\x2d4730\x2dbb5f\x2d85d196080964.device @4
Ważne: Systemctl akceptuje usługi (.service), punkt montowania (.mount), gniazda (.mount) >.socket) i urządzenia (.device) jako jednostki.
7. Wyświetl listę wszystkich dostępnych jednostek.
systemctl list-unit-files
UNIT FILE STATE
proc-sys-fs-binfmt_misc.automount static
dev-hugepages.mount static
dev-mqueue.mount static
proc-sys-fs-binfmt_misc.mount static
sys-fs-fuse-connections.mount static
sys-kernel-config.mount static
sys-kernel-debug.mount static
tmp.mount disabled
brandbot.path disabled
.....
8. Lista wszystkich działających jednostek.
systemctl list-units
UNIT LOAD ACTIVE SUB DESCRIPTION
proc-sys-fs-binfmt_misc.automount loaded active waiting Arbitrary Executable File Formats File Syste
sys-devices-pc...0-1:0:0:0-block-sr0.device loaded active plugged VBOX_CD-ROM
sys-devices-pc...:00:03.0-net-enp0s3.device loaded active plugged PRO/1000 MT Desktop Adapter
sys-devices-pc...00:05.0-sound-card0.device loaded active plugged 82801AA AC'97 Audio Controller
sys-devices-pc...:0:0-block-sda-sda1.device loaded active plugged VBOX_HARDDISK
sys-devices-pc...:0:0-block-sda-sda2.device loaded active plugged LVM PV Qzyo3l-qYaL-uRUa-Cjuk-pljo-qKtX-VgBQ8
sys-devices-pc...0-2:0:0:0-block-sda.device loaded active plugged VBOX_HARDDISK
sys-devices-pl...erial8250-tty-ttyS0.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS0
sys-devices-pl...erial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
sys-devices-pl...erial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devices-pl...erial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-devices-virtual-block-dm\x2d0.device loaded active plugged /sys/devices/virtual/block/dm-0
sys-devices-virtual-block-dm\x2d1.device loaded active plugged /sys/devices/virtual/block/dm-1
sys-module-configfs.device loaded active plugged /sys/module/configfs
...
9. Lista wszystkich jednostek, które uległy awarii.
systemctl --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
kdump.service loaded failed failed Crash recovery kernel arming
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
1 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
10. Sprawdź, czy jednostka (cron.service) jest włączona, czy nie?.
systemctl is-enabled crond.service
enabled
11. Sprawdź, czy Jednostka lub Usługa działa, czy nie?.
systemctl status firewalld.service
firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/usr/lib/systemd/system/firewalld.service; enabled)
Active: active (running) since Tue 2015-04-28 16:27:55 IST; 34min ago
Main PID: 549 (firewalld)
CGroup: /system.slice/firewalld.service
└─549 /usr/bin/python -Es /usr/sbin/firewalld --nofork --nopid
Apr 28 16:27:51 tecmint systemd[1]: Starting firewalld - dynamic firewall daemon...
Apr 28 16:27:55 tecmint systemd[1]: Started firewalld - dynamic firewall daemon.
Kontroluj i zarządzaj usługami za pomocą Systemctl
12. Wyświetl listę wszystkich usług (w tym włączonych i wyłączonych).
systemctl list-unit-files --type=service
UNIT FILE STATE
arp-ethers.service disabled
auditd.service enabled
[email disabled
blk-availability.service disabled
brandbot.service static
collectd.service disabled
console-getty.service disabled
console-shell.service disabled
cpupower.service disabled
crond.service enabled
dbus-org.fedoraproject.FirewallD1.service enabled
....
13. Jak uruchomić, ponownie uruchomić, zatrzymać, załadować ponownie i sprawdzić stan usługi (httpd.service) w systemie Linux.
systemctl start httpd.service
systemctl restart httpd.service
systemctl stop httpd.service
systemctl reload httpd.service
systemctl status httpd.service
httpd.service - The Apache HTTP Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)
Active: active (running) since Tue 2015-04-28 17:21:30 IST; 6s ago
Process: 2876 ExecStop=/bin/kill -WINCH ${MAINPID} (code=exited, status=0/SUCCESS)
Main PID: 2881 (httpd)
Status: "Processing requests..."
CGroup: /system.slice/httpd.service
├─2881 /usr/sbin/httpd -DFOREGROUND
├─2884 /usr/sbin/httpd -DFOREGROUND
├─2885 /usr/sbin/httpd -DFOREGROUND
├─2886 /usr/sbin/httpd -DFOREGROUND
├─2887 /usr/sbin/httpd -DFOREGROUND
└─2888 /usr/sbin/httpd -DFOREGROUND
Apr 28 17:21:30 tecmint systemd[1]: Starting The Apache HTTP Server...
Apr 28 17:21:30 tecmint httpd[2881]: AH00558: httpd: Could not reliably determine the server's fully q...ssage
Apr 28 17:21:30 tecmint systemd[1]: Started The Apache HTTP Server.
Hint: Some lines were ellipsized, use -l to show in full.
Uwaga: gdy używamy poleceń takich jak start, uruchom ponownie, zatrzymaj i reload za pomocą systemctl, nie otrzymamy żadnych danych wyjściowych na terminalu, jedyne polecenie status wyświetli dane wyjściowe.
14. Jak aktywować usługę i włączyć lub wyłączyć usługę podczas uruchamiania systemu (usługa automatycznego uruchamiania podczas uruchamiania systemu).
systemctl is-active httpd.service
systemctl enable httpd.service
systemctl disable httpd.service
15. Jak zamaskować (uniemożliwiając uruchomienie) lub zdemaskować usługę (httpd.service).
systemctl mask httpd.service
ln -s '/dev/null' '/etc/systemd/system/httpd.service'
systemctl unmask httpd.service
rm '/etc/systemd/system/httpd.service'
16. Jak zabić usługę za pomocą polecenia systemctl.
systemctl kill httpd
systemctl status httpd
httpd.service - The Apache HTTP Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)
Active: failed (Result: exit-code) since Tue 2015-04-28 18:01:42 IST; 28min ago
Main PID: 2881 (code=exited, status=0/SUCCESS)
Status: "Total requests: 0; Current requests/sec: 0; Current traffic: 0 B/sec"
Apr 28 17:37:29 tecmint systemd[1]: httpd.service: Got notification message from PID 2881, but recepti...bled.
Apr 28 17:37:29 tecmint systemd[1]: httpd.service: Got notification message from PID 2881, but recepti...bled.
Apr 28 17:37:39 tecmint systemd[1]: httpd.service: Got notification message from PID 2881, but recepti...bled.
Apr 28 17:37:39 tecmint systemd[1]: httpd.service: Got notification message from PID 2881, but recepti...bled.
Apr 28 17:37:49 tecmint systemd[1]: httpd.service: Got notification message from PID 2881, but recepti...bled.
Apr 28 17:37:49 tecmint systemd[1]: httpd.service: Got notification message from PID 2881, but recepti...bled.
Apr 28 17:37:59 tecmint systemd[1]: httpd.service: Got notification message from PID 2881, but recepti...bled.
Apr 28 17:37:59 tecmint systemd[1]: httpd.service: Got notification message from PID 2881, but recepti...bled.
Apr 28 18:01:42 tecmint systemd[1]: httpd.service: control process exited, code=exited status=226
Apr 28 18:01:42 tecmint systemd[1]: Unit httpd.service entered failed state.
Hint: Some lines were ellipsized, use -l to show in full.
Kontroluj i zarządzaj punktami montowania za pomocą Systemctl
17. Lista wszystkich punktów podłączenia systemu.
systemctl list-unit-files --type=mount
UNIT FILE STATE
dev-hugepages.mount static
dev-mqueue.mount static
proc-sys-fs-binfmt_misc.mount static
sys-fs-fuse-connections.mount static
sys-kernel-config.mount static
sys-kernel-debug.mount static
tmp.mount disabled
18. Jak montować, odmontowywać, montować ponownie, ponownie wczytywać punkty montowania systemu, a także sprawdzać stan punktów montowania w systemie?
systemctl start tmp.mount
systemctl stop tmp.mount
systemctl restart tmp.mount
systemctl reload tmp.mount
systemctl status tmp.mount
tmp.mount - Temporary Directory
Loaded: loaded (/usr/lib/systemd/system/tmp.mount; disabled)
Active: active (mounted) since Tue 2015-04-28 17:46:06 IST; 2min 48s ago
Where: /tmp
What: tmpfs
Docs: man:hier(7)
http://www.freedesktop.org/wiki/Software/systemd/APIFileSystems
Process: 3908 ExecMount=/bin/mount tmpfs /tmp -t tmpfs -o mode=1777,strictatime (code=exited, status=0/SUCCESS)
Apr 28 17:46:06 tecmint systemd[1]: Mounting Temporary Directory...
Apr 28 17:46:06 tecmint systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
Apr 28 17:46:06 tecmint systemd[1]: Mounted Temporary Directory.
19. Jak aktywować, włączyć lub wyłączyć punkt montowania podczas uruchamiania systemu (automatyczne montowanie podczas uruchamiania systemu).
systemctl is-active tmp.mount
systemctl enable tmp.mount
systemctl disable tmp.mount
20. Jak zamaskować (uniemożliwiając uruchomienie) lub zdemaskować punkt montowania w systemie Linux.
systemctl mask tmp.mount
ln -s '/dev/null' '/etc/systemd/system/tmp.mount'
systemctl unmask tmp.mount
rm '/etc/systemd/system/tmp.mount'
Kontroluj i zarządzaj gniazdami za pomocą Systemctl
21. Lista wszystkich dostępnych gniazd systemowych.
systemctl list-unit-files --type=socket
UNIT FILE STATE
dbus.socket static
dm-event.socket enabled
lvm2-lvmetad.socket enabled
rsyncd.socket disabled
sshd.socket disabled
syslog.socket static
systemd-initctl.socket static
systemd-journald.socket static
systemd-shutdownd.socket static
systemd-udevd-control.socket static
systemd-udevd-kernel.socket static
11 unit files listed.
22. Jak uruchomić, ponownie uruchomić, zatrzymać, załadować ponownie i sprawdzić stan gniazda (przykład: cups.socket) w systemie Linux.
systemctl start cups.socket
systemctl restart cups.socket
systemctl stop cups.socket
systemctl reload cups.socket
systemctl status cups.socket
cups.socket - CUPS Printing Service Sockets
Loaded: loaded (/usr/lib/systemd/system/cups.socket; enabled)
Active: active (listening) since Tue 2015-04-28 18:10:59 IST; 8s ago
Listen: /var/run/cups/cups.sock (Stream)
Apr 28 18:10:59 tecmint systemd[1]: Starting CUPS Printing Service Sockets.
Apr 28 18:10:59 tecmint systemd[1]: Listening on CUPS Printing Service Sockets.
23. Jak aktywować gniazdo i włączać je lub wyłączać podczas uruchamiania systemu (automatyczne uruchamianie gniazda podczas uruchamiania systemu).
systemctl is-active cups.socket
systemctl enable cups.socket
systemctl disable cups.socket
24. Jak zamaskować (uniemożliwiając uruchomienie) lub zdemaskować gniazdo (cups.socket).
systemctl mask cups.socket
ln -s '/dev/null' '/etc/systemd/system/cups.socket'
systemctl unmask cups.socket
rm '/etc/systemd/system/cups.socket'